How to Achieve Maximum Success with

Basic Guide to Finding Hidden Valves and Piping

If you are a homeowner then you need to know the details of your home like the back of your hand. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.

If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. A second valve is usually located further down the line or where the gas pipe first enters.

Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. If you find such a piping in your home then you are sure that you have a really high pressure gas system. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. There is a high chance that if you live in milder climates, then the water shutoff valve will be located in an underground box with a lid or next to an exterior wall.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. If you use a plan to find the valves then you are sure that you are able to easily know where to start.